变极器
Appends coordinates to null,点text,线,和弧几何,or replaces existing geometry with point geometry.
If the feature turns into a closed polygon as a result of adding the point,它将被标记为区域特征;otherwise,它将被标记为一条直线或一条以弧线结尾的路径。(然而,如果这是第一点,it will be tagged as a point.)
输入端口
If theMode参数设置为添加点,此转换器接受空的特性,点text,线,或圆弧几何。In this case,变压器对包含其他类型几何图形的特征没有影响。
下表显示了输入特征及其生成的几何图形。
输入功能 |
添加点-生成的几何图形 |
---|---|
null geometry |
指向 |
点几何图形 |
线 |
文本几何 |
线 |
线条几何 |
line or polygon |
圆弧几何 |
路径或多边形(带路径边界) |
other geometry |
untouched original geometry |
文本特征被视为其几何图形是文本位置的一个点。
If the input feature has 3D geometry and only the X and Y parameters are specified,然后,任何现有的Z值将被删除,生成的几何图形将是二维的。如果z参数是值为空的属性,缺少或空字符串,生成的几何图形也将是二维的。
Conversely,if the input feature has 2D geometry and the X,YZ参数都是指定的,然后,生成的几何图形将升级为三维,任何预先存在的二维坐标将获得0的Z值。
If theMode参数设置为Replace with Point,then this transformer accepts features with all types of geometries.
If theMode参数设置为在索引处插入点or替换索引处的点,那么这个变压器只接受线路,paths,和多边形。If the input is a path,一段中的最后一个点和下一段中的第一个点将被视为两个单独的点(但坐标相同)。因此将占据两个指数位置。例如,a path consisting of two segments and a total of 5 points will technically have 6 points (and consequently,6个可替换/插入的索引位置)。
对于多边形,变压器将以曲线形式在多边形边界上运行,然后将多边形的旧边界替换为修改后的边界。
输出端口
The features with the new point geometry appended to,或者更换,现有几何图形。
导致处理失败的功能输出到
参数
The features with the new point geometry appended to,或者更换,现有几何图形。
If theMode参数设置为添加点,VertexCreator将尝试将指定的坐标附加为给定要素几何图形上的点。此几何图形必须为空类型,点text,线,or arc.Other types of input feature geometry will be ignored.
If this parameter is set to Replace with Point,VertexCreator将用指定坐标处的点几何图形替换特征上的任何现有几何图形。
If this parameter is set to在索引处插入点,the VertexCreator will insert a point with x,y,and z (if the input geometry is 3D) coordinates into the input geometry at the index specified.
If this parameter is set to替换索引处的点,VertexCreator将用指定坐标的新点替换输入几何体指定索引处的当前点。
您可以通过从下拉列表中选择属性名称从要素属性的值中选择坐标,or enter numbers.如果所选属性的值为空,缺少或空字符串,该功能将通过
您可以通过从下拉列表中选择属性名称从要素属性的值中选择坐标,or enter numbers.如果所选属性的值为空,缺少或空字符串,该功能将通过
您可以通过从下拉列表中选择属性名称从要素属性的值中选择坐标,or enter numbers.
如果指定了可选的Z值参数,生成的特征将具有三维几何图形。否则,the output feature will have a 2D geometry.如果z值参数是值为空的属性,缺少或为空值,the output feature will have a 2D geometry.您可以通过从下拉列表中选择属性名称从要素属性的值中选择坐标,或输入常量。
Note:这个SurfaceDraperTransformer(在FME Professional和更高版本中可用)可用于根据三维网格或一组三维特征向二维特征的顶点提供插值高程值。
If theMode参数设置为在索引处插入点or替换索引处的点,然后,VertexCreator变压器将在索引明确规定。
Editing Transformer Parameters
Using a set of menu options,可以通过引用工作区中的其他元素来指定变压器参数。更高级的功能,such as an advanced editor and an arithmetic editor,在一些变压器中也有。To access a menu of these options,click在适用参数旁边。更多信息,看见变压器参数菜单选项.
变压器类别
搜索FME知识中心
Search for samples and information about this transformer on theFME知识中心.
Tags关键词:2dpointadder 3dpointadder 2dpointreplacer 3dpointreplacer