表面Builder
用其他表面特征切割表面特征的孔。由另一表面切割的表面必须与该第二表面具有共面,并且包含该第二表面。
All surfaces are converted into faces (for example, a mesh is converted into faces – one face per mesh part).
输入端口
表面特征:假设组内的任何两个输入表面都具有严格的容纳关系,或者没有重叠。
输出端口
包含输出表面。
除了一个几何上相同的表面将通过没用过port. Two surfaces are considered geometrically identical if their geometries match exactly.
在匹配输入几何形状时,不考虑坐标系,测量,特征和几何名称等非几何属性。
非表面特征
参数
变压器
留下此参数空白会导致整组输入曲面形成单个组。或者,此参数允许您选择要形成的曲面特征组的属性 - 每组具有对所有这些属性的相同值的特征将在组中独立处理。
No attributes other than通过...分组属性将携带输入输出功能的功能。
Note:How parallel processing works with FME: see关于并行处理有关详细信息。
此参数确定变压器是否应跨行进程执行工作。如果启用了,将为每个组的组启动一个过程通过...分组范围。
并行处理水平
例如,在一个四核机,paral最小lelism will result in two simultaneous FME processes. Extreme parallelism on an 8-core machine would result in 16 simultaneous processes.
You can experiment with this feature and view the information in the Windows Task Manager and the Workbench Log window.
是的:此变压器将按顺序处理输入组。改变价值通过...分组输入流上的参数将触发当前累计组上的批处理。如果组很大/复杂,则会提高整体速度,但如果输入组未真正订购,则可能导致不期望的行为。
No: This is the default behavior. Processing will only occur in this transformer once all input is present.
参数
此参数表示应丢弃或输出用于切割其他表面的曲面特征。
此参数将添加到每个输出功能中,如果使用该功能在某些其他功能中剪切漏洞,则包含“是”,如果该功能没有切入任何其他功能,则“否”。
如果指定了孔列表名称,则将用于在此曲面中剪切孔的功能的属性添加到此属性列表中。
Note:列表属性从工作台中的输出架构无法访问,除非首先使用在它们上操作的变压器处理它们,例如ListExploderorListConcateator。所有列表属性转换器都显示在变压器帮助的内容窗格中清单。或者,AttributeExposer可以使用。
如果设置为是的, 这程度的正常耐受性and抵消公差parameters are enabled. If set toNo, 这two parameters are disabled.
Faces must be parallel before they are allowed to cut into each other. If two faces are nearly parallel with normals that are slightly apart, use this parameter to set a tolerance in degrees. The larger the value, the less parallel the faces would have to be while still considered parallel to each other.
用法提示:将此参数一起使用抵消公差。
Faces must be co-planar before they are allowed to cut into each other. If two faces are nearly co-planar, but are a small offset from each other, use this parameter to set a tolerance in ground units. The larger the value, the farther away the faces could be while still considered co-planar.
用法提示:将此参数一起使用程度的正常耐受性。
例子
The example below illustrates the input features on the left and the output features on the right. The input consists of surface features that are coplanar. The output consists of features with cut holes wherever the surface features were contained within or intersected other surface features.
编辑变压器参数
Using a set of menu options, transformer parameters can be assigned by referencing other elements in the workspace. More advanced functions, such as an advanced editor and an arithmetic editor, are also available in some transformers. To access a menu of these options, clickbeside the applicable parameter. For more information, see变压器参数菜单选项。
变压器Categories
FME许可级别
FME专业版及以上
搜索FME知识中心
搜索有关此变压器的样本和信息FME知识中心。