Note:Can be used in conjunction withTCPIPReceiver.
Sends raw data to the specified host, which may be another FME workspace running in a different process, (located on the same machine or on a different machine), or any client application that communicates over TCP/IP.
To transport data from one FME process to another: use the TCPIPSender transformer in the source FME workspace to send data to a TCPIPReceiver transformer in the receiving FME workspace.
输入端口
输入
此变形器接受任何功能。
Output Ports
This transformer has no output ports.
Parameters
Initiation Sequence
TheInitiation Sequencespecifies whether the transformer is responsible for establishing the connection (Establish），或连接到建立主机（Connect). If the TCPIPReceiver is used with a corresponding TCPIPSender, either the sender or receiver can be the establisher.
Note:The workspace that establishes the connection must be running before the connecting workspace.
Establishing Host
This parameter is only needed by the workspace with theInitiation Sequenceparameter set toConnect, and only when the workspaces are running on different machines.
Port or Service to Use
Specify either a port number or a service (for example,http,ftp,telnet,imap,吞咽,pop3,www, andsmtp是通常与众所周知的端口号相关联的服务）。
The default value is 8586.
Attribute to Stream
此参数指定输出属性的名称。
Send Data Length
If this parameter is set toYes, then the TCPIPSender will transmit the size of each data transmission (in bytes) before sending the data payload. For example, if the TCPIPSender was sending the data “1234”, it would first transmit a value of “4” to let the receiver know to expect 4 bytes, and then transmit the data itself. If this parameter is set toNo, then the TCPIPSender will just transmit the given data.
Usage Notes
- 一个工作空间是传输流的指定的“建立者”。如果工作区之间有多个传输流，则一个工作空间必须是所有流的构建器，另一个工作空间必须连接到这些传输流。这是无论各个运输函数是否正在发送或接收数据。
- The establishing workspace must be started before the workspace that is connecting. A TCPIPReceiver/TCPIPSender cannot successfully connect to a transport stream that is not already established.
- For each transport channel, there must be a different port that is used for each server machine.
Editing Transformer Parameters
Using a set of menu options, transformer parameters can be assigned by referencing other elements in the workspace. More advanced functions, such as an advanced editor and an arithmetic editor, are also available in some transformers. To access a menu of these options, click
beside the applicable parameter. For more information, seeTransformer Parameter Menu Options.
Transformer Categories
FME Licensing Level
FME Professional edition and above
搜索FME知识中心
搜索有关此变压器的样本和信息FME Knowledge Center.