fmeserverjobsubmitter
Submits FME Spatial ETL jobs to be run on an FME Server. A job consists of a workspace (housed within a repository on an FME Server) together with values for each of its published parameters. This transformer submits one job per feature which enters it. Any published parameters of the server workspace will be given values as specified in the transformer, or taken from attributes of the feature which enters it.
Dependencies
此变换器需要FME服务器连接。
输出端口
成功将请求提交给服务器的功能。
无法将请求提交给服务器的功能。
巫师窗格
连接到FME服务器
Direct Connection: 服务器主办和港口number identify the server that will be used to execute the job.
Web连接:您还可以使用REST API进入URL来访问FME服务器。请注意,当您输入URL时,端口字段将消失。您可能需要联系您的系统管理员以获取有关主机名或URL的信息。
用户名和Password: These are optional, but, depending on your configuration, you may need them in order to access the server.
注意:您可以单击对话框底部的测试...按钮,以确保已成功建立FME服务器连接。
Select Workspace
选择存储库,选择将为进入变压器的每个功能运行的工作区。
编辑作业参数
编辑参数以启用当前工作区以将作业提交给FME服务器
If this parameter is set to Yes, then the transformer will wait until the job is completely processed by the server before proceeding. In this case, the initiating feature is output via the成功端口如果作业成功完成完成,则将添加这些属性:
- _Job_id.:分配给此作业的服务器的整数ID。
- output_datasets{}: 一种列表属性当输出数据位置(见下文)设置为临时文件夹时提供。
- output_datasets {}。姓名:DataSet的唯一名称(例如,形状_1.)。如果多个编写者使用相同的格式,则每个编写器都是唯一的。
- output_datasets {}。格式:格式名称。同名的名称适用于输出到相同格式的所有作家(例如,SHAPE对于shapefile)。
- output_datasets {}。路径:写入数据集的物理位置。您可以将此属性用作下游变压器的输入进行进一步处理。
- _numfeaturesOutput.:作业输出的数字功能。
- _优先:分配给工作的优先权。
- _requesterhost.:提交作业的FME Workbench的机器的名称。
- _RequesterResultport.:主机上的端口返回结果。
- _状态:工作状态指示;可以提交,排队,中止,成功,fme_failure,nob_failure或拉动。
- _状态消息: The translation result message.
- _timeFinished: The time the job finished .
- _timeRequested:服务器收到作业请求的时间。
- _timestarted.:服务器开始处理作业的时间。
注意:
所有时间都是yyyymmddhhmms格式。
将通过该功能输出失败port if the job either did not run to completion, or the server could not be contacted, and will have these attributes added to it:
- _job_failure_type.: Holds one of "Connection or Server Problem" or "Translation Failed". If the latter, then the following attributes will also have values; otherwise, they are empty.
- _numfeaturesOutput.:作业输出的数字功能。
- _优先:分配给工作的优先权。
- _requesterhost.:提交作业的FME Workbench的机器的名称。
- _RequesterResultport.:主机上的端口返回结果。
- _Job_id.:分配给此作业的服务器的整数ID。
- _状态:工作状态指示;可以提交,排队,中止,成功,fme_failure,nob_failure或拉动。
- _状态消息:从服务器返回的错误消息,解释了请求失败的原因。
- _timeFinished:工作完成的时间。
- _timeRequested:服务器收到作业请求的时间。
- _timestarted.:服务器开始处理作业的时间。
注意:注意: _job_id is included only if the job failure is related to an error during translation. If the job did not run due to a connection or server problem, then _job_id is not included.
如果此参数设置为否,则在将作业提交到服务器时,转换器将输出启动功能。在这种情况下,启动功能通过成功端口如果请求已成功提交,并且只将添加_job_id属性。如果无法联系服务器或作业提交否则失败,则通过该功能输出该功能失败port, and the _job_failure_type attribute will hold the "Connection or Server Problem" value.
作业优先级定义了作业将在服务器上执行的顺序。默认值为100,可能是最低优先级。
作业标记(如果提供),则定义与此工作区关联的标记以用于FME服务器的作业路由。未指定默认值。
- Temporary Folder: The job writes its output data to a temporary folder, overriding the output data location(s) specified in the workspace. Specifying Temporary Folder can be useful when linking multiple FMEServerJobSubmitter transformers to manage the workflow of multiple jobs. For an example, see the FME Knowledge Center article,FME Server Workflow Management。
- 正如工作空间所指定的那样:作业将其输出数据写入工作区中指定的位置。
此处出现要运行的工作区的任何已发布的参数。对于每一个,请在工作区运行时指定要传递的值。
Buttons
测试 | 此按钮显示在第一个向导窗格上。单击它以确认已成功建立FME服务器连接。 |
Help | 显示此变压器的帮助文本。 |
背部 | 显示上一个窗格。 |
完 | 设置变压器参数。运行工作区时,变压器将使用这些参数。 |
取消 | Closes the wizard pane and resets the parameters if they have not yet been saved. |
Editing Transformer Parameters
使用一组菜单选项,可以通过引用工作区中的其他元素来分配变压器参数。一些变压器也可提供更高级的功能,例如高级编辑器和算术编辑器。要访问这些选项的菜单,请单击除适用的参数旁边。有关更多信息,请参阅Transformer Parameter Menu Options。
变压器类别
FME许可级别
FME专业版及以上
变压器历史
此变形金机先前被命名为serverjobsubmitter。
Search FME Knowledge Center
Search for samples and information about this transformer on theFME知识中心。
标签关键词:serverjobsubmitter