span8
span4
span8
span4
CS_NAME: CANLAMB-CSRS DESC_NM: Lambert Conformal,Canada,CSRS DT_NAME: CSRSSince this is high precision,it requires a provincial gridshift file,and since the default in FME is NA83SCRS.gsb (formerly PQA8398.gsb) (Quebec) you get an error saying this isn't available.
CS_NAME: CANLAMB-83 DESC_NM: Lambert Conformal,Canada,NAD83 DT_NAME: NAD83
CS_NAME: Canada-LCC DESC_NM: Lambert Conformal Conic projection for Canada,Meter DT_NAME: WGS84
CSRS :: Referenced grid file does not exist or cannot be opened for reading.CS-MAP Reprojector: Transformation 'CSRS_to_WGS84' could not be loaded Reprojector: Could not create reprojection engine
you should check to see the that required grid file has been installed on your computer.
To sum up,if you really just want your data in NAD83 or WGS84,double check your coordinate system destination setting and make sure you chose the right one.If you are still certain that you want the high precision coordinate system,then contact the relevant provincial ministry,obtain the grid shift .gsb file from them,then add its location to Workbench - Options - Coordinate Systems to enable it in FME.
Reprojected data shifted from correct position
New Australian national datum GDA2020 support within FME
Esri reprojection engine error: Specified geotransformation may be inappropriate
Tutorial: Getting Started with the Smallworld Database
Swedish Direct Reprojection using SWEREF99 and RT90 datums
Working with NAD83 (NSRS2007) or NAD83 (CORS96) based coordinate systems in FME
Which transformer do I use to do 3D reprojection (vertical datums)?
Datum and Grid Shift For Canadian Provinces (New Brunswick example)
© 2019 亚搏在线Safe Software Inc |Legal