RasterBandremover.
从栅格功能中删除任何选定的频段。
Typical Uses
- 删除光栅频段以满足处理或格式要求。
它是如何工作的?
RasterBandremover接收栅格功能并删除任何所选频带。
在读取时,默认情况下的栅格功能具有当前选择的所有频段。可以通过使用来改变选择rasterselector..
In this example, we will remove the blue and green bands from an orthophoto, leaving the red band intact.
请注意,原始栅格功能有三个频段,频段的顺序是红色,绿色,蓝色。它们被编号,从0开始。我们只想要频段0 - 红色频段。
该raster is routed first into arasterselector., and then into the RasterBandRemover.
在里面rasterselector.参数对话框,我们更改当前选择(这是所选的所有频段,因为该功能刚刚退出其读者)。该Selection Mode是乐队和调色板列表, and the list1; 2selects only the green and blue bands.
RasterBandremover没有配置参数。
该output raster feature contains only one band - Band 0, Red.
使用说明
- 该RasterBandKeeperrasterbandremover执行类似的功能。在删除大量频带时,Rasterbandkeeper更有用,而在删除少量频带时,栅栏带动更有用。
Choosing a Raster Transformer
FME拥有广泛的变形金机,用于使用光栅数据。它们通常可以作为与整个栅格,频带,小区或调色板合作,以及用于工作流控制或与矢量数据梳理光栅的那些。亚搏在线
有关光栅几何和属性的信息,请参阅rasters(ifmeraster).
与罗斯特合作
RasterCelloriginsetter. | 设置栅格的单元格原点。 |
RasterConvolver | 应用卷积滤波器(有时称为akernel要么镜片)栅格功能并输出结果。 |
RasterExpressionEvaluator | 评估栅格或一对栅格中的每个单元格的表达式,包括代数操作和条件陈述。 |
RASTEREXTENTSCOERCER. | 用覆盖光栅范围的多边形替换输入栅格功能的几何形状。 |
Rastergcpextractor. | Extracts the coordinate system and the Ground Control Points (GCP) from the raster feature and exposes them as attributes. |
RasterGCPSetter | 使用指定的列(像素),行(行),x坐标,y坐标和z坐标设置栅格上的地面控制点(GCP)。 |
RasterGeoreferencer | 使用指定的参数来GeoReferences栅格。 |
RasterHillshader | 生成阴影浮雕效果,可用于可视化地形。 |
RasterInterpretationCoercer. | 改变底层的解释of the bands of the raster geometry on the input features, using the specified conversion options. For example, an input raster feature with three bands of interpretation (UInt16, Gray8, and Real64) could be converted to a raster feature with three bands of interpretation (Red8, Green8, and Blue8) or four bands of interpretation (Red16, Green16, Blue16, and Alpha16) in a single operation. |
rastermosaicker. | Merges multiple raster features into a single raster feature. |
Rasterpropertyextractor. | 提取栅格功能的几何属性并将其视为属性。 |
RasterPyramider | Resamples rasters to multiple resolutions, based on either number of levels or dimensions of the smallest output raster. |
RasterResampler. | 基于指定的输出尺寸,地面单位的单元格大小或原始的百分比,并对新的单元格值进行resples。 |
RasterRotationApplier | 将光栅旋转角度应用于输入栅格属性的其余属性和数据值。 预期输入是具有非零旋转角度的光栅,并且预期输出是具有0.0的旋转角度的旋转光栅。预计将修改输入栅格属性以符合由给定角度旋转的光栅的输出光栅属性。 Applying a rotation angle is primarily done for compatibility with other processing and writers that cannot handle a rotation angle. |
RasterSubsetter | 使用像素绑定而不是地坐标的剪辑栅格功能,并且可选地在周边围绕周边添加单元格。 |
rastertiler. | 通过指定单元/像素或瓷砖数量的图块大小将每个输入栅格分成一系列差块。 |
范特利奥戈翁塞纳克 | 从输入栅格功能创建多边形。为每个连续区域的像素区域输出一个多边形,在输入栅格中具有相同的值。 |
WebMapTiler | 创建一系列可通过Web映射应用程序使用的图像块,例如Bing™Maps,Google Maps™或Web地图图块服务。这是通过重新采样仪器来完成各种不同分辨率的,然后将它们拆分为瓷砖。 |
与乐队一起使用
RasterBandAdder | Adds a new band to a raster feature. |
RasterBandCombiner. | 将巧合栅格功能合并到单个输出栅格功能,保留和附加所有频段。 |
RasterBandInterpretationCoercer. | 改变单个光栅带的解释类型,如有必要,转换单元值。 |
RasterBandKeeper | 从栅格功能中删除所有未选择的频带。 |
Rasterbandminmaxxtractor. | 从栅格功能中提取最小和最大频带值,调色板键和调色板值,并将它们添加到列表属性。 |
Rasterbandnamesetter. | 将所选频段的频带名称设置在栅格上,与频带数字相比,使栅格内容更加简单地理解。 |
RasterbandNodataremover | Removes the existing nodata identifier from selected bands of a raster feature. Any values previously equal to the nodata value are considered valid data. |
RasterBandNodataSetter | 在栅格功能的所选频段上设置新的Nodata值。 |
RasterBandOrderer | Specifies the required order of bands in a raster. Bands are reordered according to the input band indices. |
RasterBandPropertyExtractor. | 提取栅格功能的频带和调色板属性并将其作为属性暴露。 |
RasterBandremover. | 从栅格功能中删除任何选定的频段。 |
漂流带带子 | 将频带或唯一频带和调色板组合分开,并输出单个栅格功能或包含所有组合的单个新栅格功能。 |
rastertatisticscalculator. | Calculates statistics on raster bands and adds the results as attributes. |
使用细胞
RasterAspectCalculator | 计算光栅的每个单元的方面(斜率方向)。方面以从北方顺时针的0到360测量。 |
RasterCellCoercer | 为栅格中的每个单元格创建各个点或多边形,可选地将频带值提取为z坐标或属性。 |
RasterCellvaluecalculator. | 在一对栅格的单元格值上评估基本算术,最小值或平均操作。 |
Rastercellvaluerepler. | 用新的单个值替换栅格中的一系列频带值。 |
rastercellvaluerounder. | 舍入光栅单元值。 |
rastersingularcellvaluecalculator | 对栅格的小区值对数值执行基本算术运算。 |
rasterslopecalculator. | Calculates the slope (maximum rate of change in z) for each cell of a raster. |
与调色板合作
梁栅栏 | Creates a palette from an attribute, and adds this palette to all selected bands on a raster. |
rasterpaletteextractor. | Creates a string representation of an existing palette on a raster and saves it to an attribute. |
Rasterpalettegenerator | 从光栅的选定频段中生成调色板。输出栅格将使所选频段由带有调色板的新频段替换。 |
RasterPaletteInterpretationCoercer | Alters the interpretation type of raster palettes. |
Rasterpalettenodatasetter. | Identifies the palette key that matches a raster band’s nodata value, and sets a value on it. |
Rasterpaletteremover | Removes selected palette(s) from raster features. |
RasterPaletteResolver | 通过用相应的调色板值替换单元值来解析栅格上的调色板。具有多个组件(如RGB)的调色板值被分解,并且分配给多个新添加频段的单个值。 |
亚搏在线工作流控制
RasterCheckpointer | Sets a checkpoint in the raster processing which forces previous processing to occur immediately. Once complete, it saves the current state to disk. |
RasterConsumer | 请求从栅格几何中的磁贴,但没有对瓦片执行实际操作。 |
rasterextractor. | 根据所选写入格式将功能的几何形状序列化为BLOB属性。 |
RasterNumericCreator | 使用数值的指定大小的栅格创建一个功能,并将其发送到工作区以进行处理。它对于使用用户指定的宽度和高度创建非常大的图像是有用的。 |
RasterReplacer | Replaces the geometry of the feature with the geometry held in the Blob Attribute. The blob is decoded according to the selected raster format. |
RasterRGBCreator. | Creates a feature with a raster of the specified size with an RGB value and sends it into the workspace for processing. |
rasterselector. | 为后续变压器操作选择栅格的特定频带和调色板。 |
矢量和栅格
ImageRasterizer | Creates a raster representation of vector or point cloud input features, using the fme_color attribute over a solid background fill for vector features. Point clouds may be rendered using their color or intensity components. |
NumericRasterizer. | 将输入点,线路和多边形功能绘制到填充后台值的数字栅格上。输入矢量特征的Z坐标用于生成像素值。没有Z坐标的功能将被丢弃。 |
Mapnikerasterizer. | 从输入向量和光栅功能生成光栅,使用MapNik Toolkit对符号化和标签进行精细控制。 |
PointonRasterValueExtractor. | 从一个或多个输入点的位置处从栅格中提取频带和调色板值,并将其设置为特征上的属性。 |
VectorOnRasterOverlayer | Rasterizes vector or point cloud features onto an existing raster. For vector features the fme_color attribute sets pixel color, and point clouds may be rendered using their color or intensity components. |
配置
输入端口
此变形器仅接受栅格功能。
输出端口
使用任何选定频段的栅格功能。
没有n-raster features will be routed to the
Rejected features will have an fme_rejection_code attribute with one of the following values:
Invalid_geometry_type.
Invalid_raster_no_bands.
拒绝功能处理:可以设置为终止翻译或在遇到被拒绝的功能时继续运行。此设置可用作默认设置FME option和A.工作区参数.
Parameters
该变压器没有参数。
Editing Transformer Parameters
使用一组菜单选项,可以通过引用工作区中的其他元素来分配变压器参数。一些变压器也可提供更高级的功能,例如高级编辑器和算术编辑器。要访问这些选项的菜单,请单击除适用的参数旁边。有关更多信息,请参阅变压器参数菜单选项.
定义值
该re are several ways to define a value for use in a Transformer. The simplest is to simply type in a value or string, which can include functions of various types such as attribute references, math and string functions, and workspace parameters. There are a number of tools and shortcuts that can assist in constructing values, generally available from the drop-down context menu adjacent to the value field.
Using the Text Editor
该文本编辑器provides a convenient way to construct text strings (including regular expressions) from various data sources, such as attributes, parameters, and constants, where the result is used directly inside a parameter.
Using the Arithmetic Editor
算术编辑器提供了一种方便的方法来构建来自各种数据源的数学表达式,例如属性,参数和特征函数,其中结果直接在参数内使用。
Conditional Values
Set values depending on one or more test conditions that either pass or fail.
内容
表达式和字符串可以包括许多函数,字符,参数等 - 是否直接在参数中输入或使用其中一个编辑器构造。
该se functions manipulate and format strings. | |
文本编辑器中提供了一组控制字符。 | |
两个编辑器都有数学函数。 | |
这些运算符可在算术编辑器中使用。 | |
该se return primarily feature-specific values. | |
可以使用FME和工作区的参数。 | |
Working with User Parameters | 创建自己的可编辑参数。 |
参考
处理行为 |
|
Feature Holding |
没有 |
Dependencies | 没有 |
FME Licensing Level | FME Professional Edition and above |
Aliases | |
History | |
Categories |
FME社亚搏国际在线官网区
FME社区是演示亚搏国际在线官网,TOS,文章,常见问题和更多的地方。获取您的问题的答案,从其他用户学习,并建议,投票和评论新功能。
Search for所有关于漂流机带动的结果on the FME Community.
例子可能包含根据开放政府许可证的信息 - 温哥华