＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！

这里连接你的数据

“＃！位置=” - 849.99863436134376 -1031.8859688596885" ＃TOP_LEFT =！ “ - 849.99863436134376 -1031.8859688596885” ＃BOTTOM_RIGHT =！ “ - 609.99863436134376 -1030.8859688596885”！＃BOUNDING_RECT = “ - 849.99863436134376 -1031.8859688596885 240 -1”！＃ORDER =“500000000000010“＃！FOLLOW_ANCHOR =” 真”＃！INFO_NODE = “假” ＃！COLOR = “1,1,0.78431372549019607,0.19607843137254902” ＃！SIZE_POLICY = “10” ＃！ANCHORED_NODE = “11” ＃！/>＃！

仅取第一个特征

“＃！位置=” - 130.25106251062508 -575.88159381593823" ＃TOP_LEFT =！ “ - 130.25106251062508 -575.88159381593823”！＃BOTTOM_RIGHT = “325.00325003250032 -718.38271882718834” ＃BOUNDING_RECT =！ “ - 130.25106251062508 -575.88159381593823 455.25431254312537 142.50112501125011”！＃ORDER = “500000000000011” ＃！FOLLOW_ANCHOR = “真” ＃！INFO_NODE = “假” ＃！COLOR = “1,1,0.78431372549019607,0.19607843137254902” ＃！SIZE_POLICY = “10” ＃！ANCHORED_NODE = “2” ＃！/>＃！

从用户参数点更换

“＃！位置=” 476.87446874468742 -532.13115631156325" ＃！TOP_LEFT = “476.87446874468742 -532.13115631156325” ＃！BOTTOM_RIGHT = “925.00925009250091 -674.63228132281336” ＃！BOUNDING_RECT = “476.87446874468742 -532.13115631156325 448.13478134781349 142.50112501125011” ＃！ORDER = “500000000000012” ＃！FOLLOW_ANCHOR =“真” ＃！INFO_NODE = “假” ＃！COLOR = “1,1,0.78431372549019607,0.19607843137254902” ＃！SIZE_POLICY = “10” ＃！ANCHORED_NODE = “3” ＃！/>＃！

重新投影点自动生成的地方

坐标系

“＃！位置=” 1082.2610626106264 -488.13053130531301" ＃！TOP_LEFT = “1082.2610626106264 -488.13053130531301” ＃！BOTTOM_RIGHT = “1512.2610626106264 -487.13053130531301” ＃！BOUNDING_RECT = “1082.2610626106264 -488.13053130531301 430 -1” ＃！ORDER = “500000000000013” ＃！FOLLOW_ANCHOR= “真” ＃！INFO_NODE = “假” ＃！COLOR = “1,1,0.78431372549019607,0.19607843137254902” ＃！SIZE_POLICY = “10” ＃！ANCHORED_NODE = “5” ＃！/>＃！

提取新的CoordSys名

“＃！位置=” 1636.2610626106264 -531.88096880968806" ＃！TOP_LEFT = “1636.2610626106264 -531.88096880968806” ＃！BOTTOM_RIGHT = “2066.2610626106261 -530.88096880968806” ＃！BOUNDING_RECT = “1636.2610626106264 -531.88096880968806 430 -1” ＃！ORDER = “500000000000014” ＃！FOLLOW_ANCHOR= “真” ＃！INFO_NODE = “假” ＃！COLOR = “1,1,0.78431372549019607,0.19607843137254902” ＃！SIZE_POLICY = “10” ＃！ANCHORED_NODE = “7” ＃！/>＃！

合并的功能的新的CoordSys名

“＃！位置=” 1660.2610626106264 -997.51062510625138" ＃！TOP_LEFT = “1660.2610626106264 -997.51062510625138” ＃！BOTTOM_RIGHT = “2090.2610626106261 -996.51062510625138” ＃！BOUNDING_RECT = “1660.2610626106264 -997.51062510625138 430 -1” ＃！ORDER = “500000000000015” ＃！FOLLOW_ANCHOR= “真” ＃！INFO_NODE = “假” ＃！COLOR = “1,1,0.78431372549019607,0.19607843137254902” ＃！SIZE_POLICY = “10” ＃！ANCHORED_NODE = “9” ＃！/>＃！

重新投影到新的CoordSys

“＃！位置=” 2247.8977189771904 -1041.2610626106264" ＃！TOP_LEFT = “2247.8977189771904 -1041.2610626106264” ＃！BOTTOM_RIGHT = “2809.4030940309408 -1140.0117501175014” ＃！BOUNDING_RECT = “2247.8977189771904 -1041.2610626106264 561.50537505375041 98.750687506875067” ＃！ORDER = “500000000000016” ＃！FOLLOW_ANCHOR =“真” ＃！INFO_NODE = “假” ＃！COLOR = “1,1,0.78431372549019607,0.19607843137254902” ＃！SIZE_POLICY = “10” ＃！ANCHORED_NODE = “14” ＃！/>＃！

连接到SketchUp的作家，有移动到本地禁用

“＃！位置=” 2932.2795627956275 -1072.8854688546892" ＃！TOP_LEFT = “2932.2795627956275 -1072.8854688546892” ＃！BOTTOM_RIGHT = “3534.4103441034408 -1215.3865938659392” ＃！BOUNDING_RECT = “2932.2795627956275 -1072.8854688546892 602.13078130781332 142.50112501125011” ＃！ORDER = “500000000000018” ＃！FOLLOW_ANCHOR =“真” ＃！INFO_NODE = “假” ＃！COLOR = “1,1,0.78431372549019607,0.19607843137254902” ＃！SIZE_POLICY = “10” ＃！ANCHORED_NODE = “23” ＃！/>＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ ＃！ FME_PYTHON_VERSION 27 DEFAULT_MACRO ORG_X GUI RANGE_SLIDER ORG_X “RANGE：[，]” X所需的原点的坐标：DEFAULT_MACRO ORG_Y GUI RANGE_SLIDER ORG_Y “RANGE：[，]” Y期望原点的坐标：INCLUDE [如果{{$（ORG_X）} == {}} { puts_real {Parameter 'ORG_X' must be given a value.};出口1;};] INCLUDE [如果{{$（ORG_Y）} {==}} {puts_real {参数 'ORG_Y' 必须被给出的值}。出口1;};]＃！START_HEADER＃！START_WB_HEADER READER_TYPE MULTI_READER WRITER_TYPE NULL WRITER_KEYWORD NULL_DEST NULL_DEST_DATASET空＃！END_WB_HEADER＃！START_WB_HEADER＃！END_WB_HEADER＃！END_HEADER LOG_FILENAME “$（FME_MF_DIR）ChooseLocalOrigin.log” LOG_APPEND NO LOG_MAX_FEATURES 200个LOG_MAX_RECORDED_FEATURES 200 FME_REPROJECTION_ENGINE FME FME_IMPLICIT_CSMAP_REPROJECTION_MODE自动FME_GEOMETRY_HANDLING增强FME_STROKE_MAX_DEVIATION 0 LOG_FILTER_MASK -1＃------------------------------------------------------------------------- MULTI_READER_CONTINUE_ON_READER_FAILURE No # ------------------------------------------------------------------------- MACRO WORKSPACE_NAME ChooseLocalOrigin MACRO FME_VIEWER_APP fmedatainspector DEFAULT_MACRO WB_CURRENT_CONTEXT # ------------------------------------------------------------------------- FACTORY_DEF * RoutingFactory FACTORY_NAME "Destination Feature Type Routing Correlator" COMMAND_PARM_EVALUATION SINGLE_PASS INPUT FEATURE_TYPE * FEATURE_TYPE_ATTRIBUTE __wb_out_feat_type__ OUTPUT ROUTED FEATURE_TYPE * OUTPUT NOT_ROUTED FEATURE_TYPE __nuke_me__ @Tcl2("FME_StatMessage 818059 [FME_GetAttribute fme_template_feature_type] 818060 818061 fme_warn") # ------------------------------------------------------------------------- FACTORY_DEF * TeeFactory FACTORY_NAME "Final Output Nuker" INPUT FEATURE_TYPE __nuke_me__