span8
span4
span8
span4
** This article applies to FME 2014 SP5 and older.As of FME 2015.0, NSRS2007 & NSRS 2011 are both supported.
FME 2014 and older does not recognize NAD83 (NSRS2007) or NAD83(CORS96) based coordinate systems.
There are a number of variants of NAD83, and FME 2012 supports the following:
- NAD83 (used when the follow two don't apply)
- HARN/HPGN
- CSRS
There are a couple of options:
1) Use the ESRIReprojector if ArcGIS is installed.
2) Modify
DATUM_DEF NAD83(CORS96) \ DESC_NM "NAD83(CORS96)" \ ELLIPSOID GRS1980 \ USE HPGN \ DELTA_X 0.0 \ DELTA_Y 0.0 \ DELTA_Z 0.0 COORDINATE_SYSTEM_DEF LL-NAD83(CORS96) \ DESC_NM "Lat/Long NAD83(CORS96)" \ GROUP LL \ PROJ LL \ UNIT DEGREE \ DT_NAME NAD83(CORS96)
Note: NAD83(2007) approximates NAD83(CORS96), so this addition will satisfy both NAD83 variants.
Reprojecting Raster World Files
FME and the Gtrans coordinate system transformation tools
MicroStation Text Styles in FME 2015.1 and newer
Named Connection Compatibility between Esri 10.4 Data Interoperability and FME 2016 Extension
Using the CSGBuilder to construct 3D solids
Reading ESRI WKT Coordinate Systems Can Result in Prefixed/Suffixed Coordinate System Names
FME Fails to Write Coordinate System to Autodesk Map 3D Dataset
© 2020 Safe Software Inc |Legal