DWGStyler

Block Name specifies the block that will be placed at the point location. Click the browse button to pick the name from the set of blocks defined in the DWG/DXF template file.

Format attribute set:autocad_block_name.

Block Rotation specifies rotation of the block (in degrees counterclockwise from horizontal). This can be set to any floating point value between -360.0 to 360.0, or taken from an attribute.

Format attribute set:autocad_rotation

Block Size By indicates how the size of the block will be specified. If ground units are chosen, then the block will be scaled so that its range in x, y, and z covers the specified amounts. If scale factor is chosen, then the amounts in x, y, and z specify the scaling which will be applied to the block in each of the three axes.

X specifies the sizing amount for the x axis, which can be a floating point value or taken from an attribute. Its meaning is dependent on the Block Size By setting described above.

Format attribute set:autocad_x_scale(if Block Size By is Scale Factor);autocad_size_x(if Block Size By is Ground Units)

Y specifies the sizing amount for the y axis, which can be a floating point value or taken from an attribute. Its meaning is dependent on the Block Size By setting described above.

Format attribute set:autocad_y_scale(if Block Size By is Scale Factor);autocad_size_y(if Block Size By is Ground Units)

Z指定大小amount for the z axis, which can be a floating point value or taken from an attribute. Its meaning is dependent on the Block Size By setting described above.

Format attribute set:autocad_z_scale(if Block Size By is Scale Factor);autocad_size_z(if Block Size By is Ground Units)

Linetype specifies the AutoCAD linetype that will be used to render the line. Click the browse button to pick the name from the set of blocks defined in the DWG/DXF template file.

Format attribute set:autocad_linetype

Linetype Generation specifies how linetypes will be rendered at each vertex of the line. If set to Continuous, line vertices are ignored since the pattern is applied to the line when it is rendered. If set to Restart At Each Vertex, the pattern is restarted at each vertex of the line.

Format attribute set:autocad_linetype_generation

线权重指定在呈现时的线的厚度，以百分之少数毫米。

Format attribute set:autocad_lineweight

LINE SCALE指定在呈现行时缩放行模式的量。

Format attribute set:autocad_linetype_scale.

Line Elevation sets a single elevation value that will be applied to all the vertices of the line. This is an efficient way to set a constant elevation (z) to an otherwise two-dimensional line.

Format attribute set:autocad_elevation

Area Entity Type specifies the kind of entity and fill pattern that will be created to represent the feature when it is written to AutoCAD DWG/DXF. The choices with the corresponding AutoCAD entity type are:

Fill Pattern Name sets the name of the fill pattern that will be used to fill either the hatch or mpolygon. Click the browse button to pick the name from the set of fill patterns that ship with AutoCAD.

Format attributes set:autocad_hatch_pattern_name(if Area Entity Type is set to Hatch With Fill Pattern);autocad_mpolygon_pattern_name(if Area Entity Type is set to Mpolygon With Fill Pattern)

Pattern Scale specifies the amount that the fill pattern will be scaled when the area is rendered.

Format attributes set:autocad_hatch_pattern_scale(if Area Entity Type is set to Hatch With Fill Pattern);autocad_mpolygon_pattern_scale(if Area Entity Type is set to Mpolygon With Fill Pattern)

梯度的名字sets the type of the gradient pattern (predefined as part of AutoCAD) that will be used to fill either the hatch or mpolygon.

Format attribute set:autocad_hatch_gradient_name(if Area Entity Type is set to Hatch With Gradient Pattern);autocad_mpolygon_gradient_name(if Area Entity Type is set to Mpolygon With Gradient Pattern)

Gradient Fill Color 1 sets the first color to be used in the gradient pattern that will be used to fill either the hatch or mpolygon.

Format attributes set:autocad_hatch_gradient_color1(if Area Entity Type is set to Hatch With Gradient Pattern);autocad_mpolygon_gradient_color1(if Area Entity Type is set to Mpolygon With Gradient Pattern)

Gradient Fill Color 2 sets the first color to be used in the gradient pattern that will be used to fill either the hatch or mpolygon.

Format attributes set:autocad_hatch_gradient_color2(if Area Entity Type is set to Hatch With Gradient Pattern);autocad_mpolygon_gradient_color2(if Area Entity Type is set to Mpolygon With Gradient Pattern)

Fill Angle sets the angle of the gradient pattern that will be used to fill either the hatch or mpolygon.

Format attributes set:autocad_hatch_gradient_angle(if Area Entity Type is set to Hatch With Gradient Pattern);autocad_mpolygon_gradient_angle(if Area Entity Type is set to Mpolygon With Gradient Pattern)

Fill Origin X sets the x coordinate of the origin for the gradient pattern that will be used to fill either the hatch or mpolygon.

Format attributes set:autocad_hatch_gradient_origin_point_x(if Area Entity Type is set to Hatch With Gradient Pattern);autocad_mpolygon_gradient_origin_point_x(if Area Entity Type is set to Mpolygon With Gradient Pattern)

填充原点y设置原点的y坐标，以便用于填充舱口或mpolygon的渐变模式。

Format attributes set:autocad_hatch_gradient_origin_point_y(if Area Entity Type is set to Hatch With Gradient Pattern);autocad_mpolygon_gradient_origin_point_y(if Area Entity Type is set to Mpolygon With Gradient Pattern)

Text Entity Type specifies the kind of entity that will be created to represent the feature when it is written to AutoCAD DWG/DXF. The choices with the corresponding AutoCAD entity type are:

Format attribute set:autocad_entity

TrueType Font Name sets the name of the font that will be used to draw the text while Multi-Text is chosen for the entity type. Click the browse button to pick the font name.

Format attribute set:autocad_mtext_string

Text Shape Name sets the name of the shape that will be used to draw the text while Text is chosen for the entity type. Click the browse button to pick the shape name from those defined in the DWG/DXF Template File.

Format attribute set:autocad_shape_name

Text Justification sets the justification for text placement.

Format attribute set:autocad_justification.

Sets the size of the text that is placed.

Format attribute set:fme_text_size

Sets the rotation of the text that is placed.

Format attribute set:fme_rotation

设置将放置的文本字符串。

Format attribute set:fme_text_string

If this section is active, text features will set or reset the annotation scale related properties of the text.

The annotation scale selection can be used to choose an annotation name from the default set of Imperial and Metric annotation scale values. These are expected to select and match annotation scale definitions in a default created drawing or in a template file if one is provided. If no matching definition is found, the annotation scale will not be written to the text or multi-text entity. To create new annotation scale definitions, use the annotation scale definition option below.

The annotation scales definition section allows for the creation of new annotation scale definitions in the destination drawing annotation scale list, along with the assignment of those annotation scales to text and multi-text entities. The scale names, paper unit values, and drawing unit values can be entered directly or constructed from attribute values. The exception to this, is if the annotation scale name is already defined in a default created drawing, or in a template file if one is provided.

Format attributes set:autocad_anno_scale{}.name,autocad_anno_scale{}.paper_units, andautocad_anno_scale{}.drawing_units

Text Annotation Scale Force Visible

这是可以在文本或多文本实体上设置的标志，以覆盖目标图形AnnoAllvisible系统变量。设置为true时，无论当前比例如何，这会强制显示要显示的对象。

Format attributes set:autocad_anno_force_visible