DGNStyler
通过提供一个方便的接口设置各种本特利Microstation的设计格式特定属性准备输出到本特利Microstation的设计V7 / V8特征。
参数 - 颜色
指定将笔的颜色将通过在FME功能指定,而不是由RGB颜色或颜色索引的水平的颜色进行设定。(请注意,此参数仅由设计作家的V8版本的支持。)
格式属性集:igds_color_set_bylevel
要使用的颜色的指定格式。这适用于笔的颜色和它一起使用来渲染功能的填充颜色两者。
指定将用来渲染功能的笔的颜色。画笔颜色确定线,和区域边界的颜色。要编辑此参数,单击浏览按钮,文本字段的右侧。
格式属性集:fme_color
Note:请注意,当指定了这个参数,igds_color属性从特征移除并fme_color设置。这是因为igds_color覆盖fme_color如果两者都存在。
Note:另外请注意,由指定的RGB颜色fme_color可以被存储为颜色表的索引,其最接近它,其中,所述颜色表被定义为种子文件中一组特定的RGB颜色。
指定将用于功能的填充颜色。填充颜色确定的区域的特征的边界内使用的颜色。要编辑此参数,单击浏览按钮,文本字段的右侧。
格式属性集:fme_fill_color
Note:请注意,当指定了这个参数,igds_fill_color属性从特征移除并fme_fill_color设置。这是因为igds_fill_color覆盖fme__fill_color如果两者都存在。
Note:另外请注意,由指定的RGB颜色fme_color可以被存储为颜色表的索引,其最接近它,其中,所述颜色表被定义为种子文件中一组特定的RGB颜色。
指定笔颜色的颜色表的索引。索引颜色将用于该功能。画笔颜色确定线,和区域边界的颜色。此参数可以在0和255之间被设定为整数值。
格式属性集:igds_color
指定填充颜色的颜色表的索引。索引颜色将用于该功能。填充颜色确定的区域的特征的边界内使用的颜色。此参数可以在0和255之间被设定为整数值。
格式属性集:igds_fill_color
参数 - 细胞
如果此部分是活动的,点特征将变成细胞和给定的小区名称,旋转和尺寸。
与其他几何类型功能不会受到这一节设置的影响。
格式属性进行设置:igds_type至igds_cell要么igds_shared_cell
指定将通过变压器被用作单元名称源的现有宾利Microstation的设计单元文件的名称。它不使用实际设计的作家 - 细胞库文件必须在作家的参数中指定和指定的文件在这里应该包含相同的单元名称。大多数情况下,同一个文件将在变压器和作家都可以使用。还应注意的是,如果没有细胞被使用,那么这个参数可以留空。
指定将被放置在点位置的单元格。单击浏览按钮,从集的单元库文件中定义的细胞挑名称。
格式属性集:igds_cell_name
指定单元格将如何被写入。如果指定库的值,igds_cell元素创建预计在单元库文件,以引用的单元定义。否则,如果指定的共享(V8仅)的值,那么igds_shared_cell元素中创建的目的地not refer to a cell definition in the cell file definition.(Note that the Shared value for this parameter is only supported by the V8 version of the Design writer.)
格式属性集:igds_type至igds_cell要么igds_shared_cell
Specifies if the graphic cells are to be created as relative graphic cells.Relative graphic cells map the cell members with the lowest level number to the current cell feature's level which becomes a base level for the relative graphic cell.All the subsequent cell members have their levels offset according to the base level.This does not apply to point or shared cells.(请注意,此参数仅由设计作家的V8版本的支持。)
格式属性集:igds_is_graphic_cell_relative
Specifies rotation of the cell (in degrees counterclockwise from horizontal).This can be set to any floating point value between -360.0 to 360.0, or be set to a value taken from an attribute.
格式属性集:igds_cell_rotation
Indicates how the size of the cell will be specified.If master units are chosen, then the cell will be scaled so that its range in x, y, and z covers the specified amounts.If scale factor is chosen, then the amounts in x, y, and z specify the scaling which will be applied to the cell in each of the three axes.
Specifies the sizing amount for the x axis, which can be a floating point value or taken from an attribute.Its meaning is dependent on the Block Size By setting described above.
格式属性进行设置:igds_cell_x_scale(if Cell Size By is Scale Factor);igds_cell_size_x(if Cell Size By is Master Units)
Specifies the sizing amount for the y axis, which can be a floating point value or taken from an attribute.Its meaning is dependent on the Block Size By setting described above.
格式属性进行设置:igds_cell_y_scale(if Cell Size By is Scale Factor);igds_cell_size_y(if Cell Size By is Master Units)
Specifies the sizing amount for the z axis, which can be a floating point value or taken from an attribute.Its meaning is dependent on the Block Size By setting described above.
格式属性集:igds_cell_z_scale(if Cell Size By is Scale Factor)
参数 - 线
如果此部分是活动的,则线性特征将用于输出到本特利Microstation的设计制备。
与其他几何类型功能不会受到这一节设置的影响。
Specifies an index in the range 0 to 31 which designates the width or thickness of the lines used to render a graphic element.In addition, the line weight may be set to ByLevel, which specifies that the line weight be set by the level specified on an FME Feature.Click the browse button to pick from a visual representation of the possible values.
格式属性集:igds_weightandigds_weight_set_bylevel
Specifies an index in the range 0 to 7 which designates the style of the lines used to render a graphic element.In addition, the line style may be set to ByLevel, which specifies that the line style be set by the level specified on an FME Feature.Click the browse button to pick from a visual representation of the possible values.
格式属性集:igds_styleandigds_style_set_bylevel
参数 - 文本
如果此部分被激活,那么文本功能将输出到宾利Microstation的设计准备。
与其他几何类型功能不会受到这一节设置的影响。
Specifies the font that will be used for the text.Values from 0..511 are RSC fonts, while values from 512..1023 are SHX fonts, and values above 1023 are True Type fonts.
格式属性集:igds_font
Specifies the ID of the textstyle that will be used.If a matching ID is found in the seed file, then that text style information will be applied to this text element as the default style.
Any text style options set here will take precedence over the matched default text style information.
格式属性集:igds_textstyle_id
Specifies the size of the text, measured in ground units.This is stored as the height of the text element.
格式属性集:fme_text_size
Specifies the width of the text, measured in ground units.If this parameter is not specified, then the Bentley Microstation Design writer uses theText Size。
格式属性集:igds_text_width_multiplier
Sets the justification code of the text.
格式属性集:igds_justification
Specifies the rotation of the text string.The rotation is measured in degrees counterclockwise up from the horizontal.
格式属性集:fme_rotation
Specifies whether or not the text should have a bold style.
格式属性集:igds_textstyle_bold
Specifies whether or not the text should have an italic style and the angle in degrees at which the text will slant.
An angle of 30 degrees is usually used to apply an italic style.
格式属性集:igds_textstyle_slant
Specifies whether or not the text should have an underline style.
格式属性集:igds_textstyle_underline
Specifies whether or not the text should have an overline style.
格式属性集:igds_textstyle_overline
其他参考
有关样式的详细信息:
- 看到Bentley Microstation Design Reader/Writer > Feature Representation在里面FME Readers and Writers手册。在工作台,选择Help> FME读者和作家参考。
编辑变压器参数
使用一组菜单选项,变压器参数可以通过引用在工作区中的其它元件来分配。更先进的功能,如高级编辑,算术编辑,也是一些变压器可用。要访问这些选项的菜单,点击适用的参数旁边。欲了解更多信息,请参阅变压器参数菜单选项。
变压器分类
搜索FME社区亚搏国际在线官网
搜索样品和有关该变压器的FME社亚搏国际在线官网区。